| | | | | | | | | | | | | | | abls2 applications: features: 11.4 x 4.7 x 3.3 mm pb rohs compliant abracon is iso 9001 / qs 9000 certified abracon is iso 9001 / qs 9000 certified standard specifications: ? suitable for reflow ? suitable for thin equipment ? low height reduced to 3.3mm ? tight stability & extended temperature ? computers, modems, microprocessors ? automotive and industrial * ? wireless applications options & part identification: (left blank if standard) hc / 49us (at49) low profile surface mount microprocessor crystal 30332 esperanza, rancho santa margarita, california 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com revised: 08.2 0.10 visit www.abracon.com for terms & conditions of sale a -10c to +60c b -20c to +70c c -30c to +70c n -30c to +85c d -40c to +85c j* -40c to +105c k* -40c to +125c l* -55c to +125c u** 10 ppm g 15 ppm h5 5 ppm x 20 ppm note: fundamental bt frequency stability 1 10 ppm w 25 ppm 100ppm max.at -10 c to +60 c only. 7 15 ppm y 30 ppm * frequency stability 50ppm, 100ppm, 150ppm only. 2 20 ppm h 35 ppm contact abracon for tighter frequency stability. 3 25 ppm q 100 ppm ** -10 to +60c only. 4 30 ppm r 150 ppm esr please specify cl in pf or s for series (minimun 10pf) packaging mode fb for fund bt>24mhz f for fund. at>24mhz t for tape and reel abls2 - frequency - - r - - - - - .pmetgnitarepo ycneuqerf freq. stability xx.xxxx mhz load capacitance freq. tolerance rxxx (value in ? ) drive level dependency (dld) from 1w to 500w (minimum 7 points tested) ? change in frequency (maximum - minimum) over dld range < 10ppm ? change in esr (maximum - minimum) over dld range < 25% of max esr value ? maximum esr over dld range < max esr value table 1: esr esr ( ? ? ) 3.579 - 4.999 (fund.) 180 5.000 - 5.999 (fund.) 120 6.000 - 7.999 (fund.) 100 8.000 - 8.999 (fund.) 80 9.000 - 9.999 (fund.) 60 10.000 - 15.999 (fund.) 50 16.000 - 50.000 (fund.) 40 24.01 - 31.999 (3rd o/t) 100 32.000 - 75.00 (3rd o/t) 80 frequency (mhz) frequency tolerance at +25c frequency stability over the op erating temp. (ref to +25c) parameters 3.579545 mhz to 75 mhz 50 ppm max. (see options) frequency abracon p/n abls2 series operation mode operating temperature storage temperature - 55c to + 125c 0c to + 70c (see options) 50 ppm max. (see options) equivalent series resistance shunt capacitance c 0 load capacitance c l drive level aging at 25c 3c per year insulation resistance see table 1 18pf (see options) 1 mw max., 100w typical 500 m min at 100vdc 15v 7pf max. 5ppm max. ? reduced height to 3.3mm at cut (fundamental or 3rd ot) or bt cut (see options) 3.579545mhz - 24.0mhz (fundamental) (standard) 24.01 - 75.00mhz (3rd- overtone) (standard) 24.01mhz - 50.00mhz (fund. at or bt) (see options)
||||||||||||| | | abls2 1 1 . 4 x 4.7 x 3 . 3 mm pb rohs compliant abracon is iso 9001 / qs 9000 cer tified abracon is iso 9001 / qs 9000 cer tified 303 3 2 e s p e ranza , r a n c ho s ant a m a r g a rit a , cal ifo r n i a 926 8 8 t el 949 - 546 - 800 0 | f a x 949 - 546 - 8 0 0 1 | w w w . abraco n . c o m revised: 08.20.10 visit www.abracon.com for terms & conditions of sale h c / 4 9us (at 4 9) low p r ofile sur f a c e m o unt m i c r o p roce s s o r c r ysta l dimensions: inches (mm) outline drawing: dimensions: mm tape & reel: reduced height to 3.3mm reflow profile: attention: abracon corporation?s products are cots ? commercial-off-the-shelf products; suitable for commercial, industrial and, where designated, automotive applications. abracon?s products are not specifically designed for military, aviation, aerospace, life-dependant medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. for applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from abracon corporation is required. please contact abracon corporation for more information.
|